Do you know the structure of disc granulator?

　　Disc granulator is one of the important equipment for producing organic fertilizer. It is assembled by disc, frame, transmission device, etc. Among them, the internal structure has passed the relevant quality certification and achieved special technical performance. Therefore, the quality is firm and the operation efficiency is high.

　　I: Composition of granulator

　　1. Granulating disc: The angle of the granulating disc of this machine adopts the arc structure of the whole machine, and the granulation rate can reach more than 93. The granulating disc is equipped with three discharge ports, which is convenient for intermittent production operations, greatly reducing the labor intensity and improving labor efficiency. The bottom of the granulating disc is reinforced by multiple heat dissipation steel plates, which is sturdy, durable and non-deformed.

　　2. Frame part: Since the rotating part and the rotating part of the whole body are supported by the frame, the force is large. Therefore, the frame part of the machine is welded with standard thickened channel steel, and has passed strict quality certification and specific process requirements to achieve the purpose of the machine.

　　3. Transmission part: The whole machine, the transmission part is very important, and the work of the whole machine is completed from then on. The main motor and reducer installed on the gearbox adjustment frame are not national ISO inspection-free products, quality. The motor drives the pulley, triangular gear, reducer and pinion. The pinion rotates the large gear on the granulation disk to make the pellets work.

　　4. Adjustment parts of the transmission frame and granulation plate: The important part of the whole machine is the granulation plate, which is installed on the adjustment parts, so the heavy industrial door is made of medium-sized carbon steel plate and channel steel. And through strict quality control and specific process requirements, to achieve the purpose of this machine.

　　5. Automatic cleaning device: This part is installed above the granulation disk, in the shape of a lower frame, and is equipped with an automatic cleaning plate to facilitate the adhesion of materials during production, thereby greatly extending the service life of the machine. Save labor.

　　II: Internal structure of the granulator

　　1. Adjustment part: The main part of the whole machine is the granulation plate, and the granulation plate is installed on the adjustment part. Our company is engaged in the welding of carbon steel plates and channel steels, and has passed strict quality certification and meets the requirements of this machine.

　　2. Frame part: Since the transmission part and rotating working part of the whole mechanism are supported by the frame, the force is relatively large, so the frame part of the machine is welded with carbon channel steel, and has passed strict quality certificates and specific technical requirements to achieve the purpose of this machine.

　　3. Transmission part: The transmission part of the whole machine is very important, and the whole work is completed in this way. The motor and reducer on the installation and gearbox adjustment frame are all inspected products with quality certified by the quality system.

　　4. Automatic material cleaning part: This part is installed above the granulation tray, and the lower frame shape is equipped with an automatic cleaning plate on it to remove the materials stuck on the wall during the production process, which greatly improves the cleanliness of the material. The service life of the machine also saves labor.

　　5. Partial granulation disc: The granulation disc angle of the disc granulator adopts an overall arc design, and the granulation rate can reach more than 93%. The bottom of the granulation disc is also reinforced by multiple radiant steel plates, which is durable and unchanged.